View CartMy Account / Order StatusHelp
Affiliates Welcome

Distributors Welcome




Join our mailing list!




(Your shopping cart is empty)

  Home > WATER SEALER & STABILIZER >

WOOD SEALER/PENETRANT 5 GALLON
WOOD  SEALER 5 GALLON PAIL

ONETIME LIFETIME TREATMENT!


 
PETRI-WOOD WOOD SEALER
Our Price: $250.00


Availability:: Usually Ships in 2 to 3 Business Days
Product Code: WS6005

Description
 
PETRI-WOOD WOOD SEALER & CONCRETE SEALER  TELL YOUR FRIENDS ABOUT US
 

WOOD TREATMENT! The ultimate in WOOD PRESERVATION. This dynamic product triggers the early stages of WOOD PETRIFICATION.Petriwood is a PENETRANT, not a coating. Treat your OLD OR NEW wood deck, dock, fence, outdoor furniture, equine center and any other wooden or bamboo construction with this dynamic Cedar Oil and Silicone solution. This product successfully seals up concrete-brick-stucco & center block. Works on wood and cement roofing material. Excellent product for sealing up basements from moisture leaching in. Petri-woods unique penetrating ability gets to the core of the wood and delivers a water, insect and decay proof treatment that will eliminate splitting, checking, cupping and expansion or contraction of the wood. Fastener rejection is eliminated. Strength is increased by fiber and cellular adhesion.

Petri-wood provides protection in below zero to 130f degree temperatures. Can be used inside or outside. Apply using a compression sprayer, air or airless paint guns, brush or roller. Water or oil based paints and stains can effectively be applied after treatment. The composition of Petri-wood meets FDA FOOD GRADE requirements.

How This Product Works:

PETRI-WOOD© solution penetrates the cellular structure of green or kiln dried timber and wood media derivatives such as OSB.  Petri-Wood proprietary non VOC solvents cross linked to specially refined red cedar wood oil turpenes and siloxene synergist, displace moisture while entering all wood structure through their vascular system.

PETRI-WOOD carriers deliver the antimicrobial and termiticidal agents to the wood cell structure where it is encapsulated and solidified by permeable silicone molecules. Natural wood oils are transformed to a wax-like consistency similar to glue which mirrors the effect of an internal adhesive increasing the solidity of the treated product. PETRI-WOOD treated wood fibers resist efforts of all cellulose consuming insects. PETRI-WOOD treatments result in water resistant and dimensionally controlled building material for above ground construction. Paint or stain ready in 72 hours. There is no offensive odor or transferable residue associated with Petri-Wood. All components are FDA, GRAS and EPA 25b list approved as minimum risk pesticides by the Food Quality Protection Act of 1996.
 

Equipment & Tools Required

 

Always remember to cover any existing plants or grass in the immediate area.  You are spraying a Penetrant that will render the plant moisture free.  When you have completed the job it is always a good idea to soak the surrounding area down with a water hose, just in case.

Ladders, Brooms
Drop Cloths, Tape
Respirator or Mask, Goggles & Rubber Gloves
Plastic Bucket (clean up)
Paint brush roller & Brushes incase of equipment failure
Rags & Sand Paper
Hammer, Screws & Nails, Electric Drill
Extra 2x4's & 2x6's just in case
Camera (before & after photo's

Pressure Washers:                                                                                                                                    For best results, always clean the surface first. Appling the PETRI-WOOD while surface is still wet will give you the best results.  It’s very important if you have not used a pressure washer, that you practice, practice & practice to make sure you do not scare the wood.  You should always use the lowest pressure and largest tip size that will clean the wood sufficiently, quickly, and with minimal chance of scarring damage.

Airless Spray gun & other apparatuses for treating the surfaces:                                                                                                                                For best results use an airless sprayer that offers a 100 to 500 PSI and contains an engine of 1/4 to 1/2 horsepower.  You can also use a pump up sprayer, backpack sprayer or paint brush.

Dipping method:  Leave soaking for 1 hour, let dry for 72 hours

Hot & Cold Bath:                                                                                                                                                      The thermal process or hot-cold bath involves placing wood in a tank of hot preservative oil followed by immersion in cold preservatives. The hot bath heats and expands the air within the wood, forcing some of the air out. The wood is then immersed in the cold bath and the heated air contracts pulling preservative in with it.

Application Rates for wood projects:                                                                                                            Note:  You only need to do one side of the wood, as it will be absorbed throughout the entire wood structure.  Always work in a maximum area of 100 sq. ft. using a wet on wet spraying method. 

NOTE: DO NOT LET PRODUCT DRY PRIOR TO SECOND AND THIRD COATS

Wood thickness 2X—(2x4--2x6) requires a minimum of 3 applications for total penetration.  One gallon will treat 100 sq ft

Wood thickness 1X—(1x4--1x6) requires a minimum of 2 applications for total penetration.  One gallon will treat 150 sq ft

Example:  If you’re doing a 400 sq. ft. Deck you would start at one end and do 100 sq. ft. increments, when you are done, you will then go back to where you started, and do it again, and then one more time completing all 3 applications before moving on to the next 100 sq. ft.  You would also use the same application process on fencing material except you would only apply 2 applications. 

Application Rates for Concrete, brick block projects:                                                                                                                                                               Use same directions as used in the wood surfaces for 2X a minimum of 3 applications for total penetration. 

IMPORTANT NOTE:  ALWAYS REMEMBER TO GET THE SURFACE OF ANY CONCRETE APPLICATIONS WET PRIOR TO SPRAYING ON THE PETRI- WOOD PRODUCT.

 

IF YOU HAVE ANY QUESTIONS CALL 1-210-599-0449

Features
  • Deck Sealer, Water sealer, water proofer, Natural water sealent, Deck, Sealent, Sealer, Thompsons water sealer, Thompsons, Deck sealer, fence sealer, seal decks, how to seal decks, how to water proof decks, seal timbers, wood, sealer, sealers, water proof, sealants, sealant, deck treatment, Beetles, wood beeatles, warping, twisting, log homes, concrete sealer, waterproof patio, waterproof sidewalk, brick, mortar, saw mills, cabnets, wood cabnets, wood treatment, timber treatment, eco friently wood treatment, wood treatment for decks, water sealer for decks,

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

WATER SEALER & STABILIZER
Cedar Oil Industries

 About Us
 Become a Partner
 Privacy Policy
 Send Us Feedback
 
Company Info | Contact Us | Category Index | Help | Terms of Use
Copyright © Cedar Oil industries. All Rights Reserved.
Built with Volusion